Analysis of the injection mold design experience

Our production of china injection mold products have been widely applied in many fields, such as electronics and electric industry, network media, telecommunications and living, etc., the following is our enterprises in the design of some of the ideas:

First, the injection mold must be able to complete the part of the processing operations;

Secondly, it must give the injection mold to specify the equipment used, and meet the technical parameters of the equipment;

Third, the processing out of the injection mold is valid in part, must be able to ensure dimensional tolerances of the parts within the allowable range of parts drawings;

Fourth, shearing, punching die to ensure the blanking period, the frequency of use, and smooth grinding mode, simply perform;

Fifth, for the special process of plastic injection molds, mold must be prepared using the method of designers and precautions;

Sixth, the injection mold at the time of installation and removal, if you need to use special tools.

In addition, the above mentioned injection mold design elements, these are just basic requirements, automobile injection mold system we have often put to use for its maintenance, development and design stage to correct errors produced, injection mold system is able to adapt to external changes , so that products with the times, to achieve performance improvement and expansion capabilities. Not every injection mold can be put into use after the completion of its task, we need to verify its proofreading, during use, but also pay attention to temperature regulation, high temperature injection mold processing must be hurt harm.