2021年7月21日星期三

Advantages And Disadvantages Of Two-Shot Injection Molding

There are a variety of manufacturing methods used to create products using plastic polymers, including Two Shot Mold, compression thermoset molding, and extrusion. Although all of these are viable manufacturing processes, this process has several advantages that make it the first choice of many plastic manufacturers. The process is relatively simple; one material is injected into the mold to make the initial part of the product, and then the second injection of the second material is compatible with the original material. Many manufacturers use this method to make plastics or polymers for three good reasons.

Two-shot injection molding is cost-effective

The two-step process only requires one machine cycle to rotate the initial mold and place the second mold around the product so that the second compatible thermoplastic can be inserted into the second mold. Since the technology uses only one cycle, rather than a separate machine cycle, any production run with a lower cost requires fewer employees to produce the final product, and each run provides more items. It also ensures a firm bond between materials without the need for further assembly lines.

Strengthen product quality

Two-shot injection molding can improve the quality of most thermoplastic products from the following aspects:

Improved aesthetics. Items made of different colored plastics or polymers look better and are more attractive to consumers. If the product uses more than one color or texture, it will appear more expensive.

Improve ergonomics. Because this process allows the use of a soft-touch surface, the resulting project can have ergonomically designed handles or other parts. This is especially important for tools, medical equipment, and other hand-held items.

When silicone and other rubber materials are used for gaskets and other parts that require a strong seal, it provides a better seal.

It allows you to combine the superior comfort and practicality of hard and soft polymers, even for the smallest products.

Compared to overmolding or more traditional insertion processes, it can greatly reduce the number of misalignments.

It enables manufacturers to create more complex mold designs using multiple materials that cannot be effectively bonded by other processes.

This bond is very strong, creating a product that is more durable, more reliable and has a longer lifespan.

Versatility

Product manufacturers favor a wide range of applications for two-shot injection molding, including automotive interior parts, medical equipment, tools, and toys. It allows manufacturers to combine various materials and colors to create a strong and attractive final product. Some materials can be effectively combined with this process, including silicone and thermoplastics, nylon and thermoplastic elastomers, or hard nylon and soft-touch materials.

Two-shot injection molding can solve your company’s product production difficulties. An experienced plastic manufacturer can guide you from concept to finished product and ensure a cost-effective solution.

We are Injection Molding Maker. Please feel free to contact us if you are interested in our products.

2021年7月13日星期二

The Difference Between Double Shot Molding And Overmolding

 There are a variety of manufacturing methods used to make plastic molded products. The two methods mentioned in this article, double shot molding, and over-molding, are viable manufacturing processes and provide some advantages for many plastic manufacturers. Both of these processes are difficult to master because they require very strict tolerances. Below, we discuss the differences and advantages of double-shot molding and over-molding.

Two-shot molding

Two-shot molding, sometimes called double-shot molding, is a manufacturing process that uses two different materials to produce complex molded parts by molding plastic around preformed metal or plastic inserts. The process is relatively simple; one material is injected into the mold to make the initial part of the product, followed by a second injection of another material that is compatible with the initial injection molded part. The two plastic resins then form molecular bonds, and the multi-resin molding is cooled and ejected.

Two Shot Mold is an ideal process for complex, multi-material, multi-color plastic products; especially in mass production scenarios. Other advantages include:

Lower unit cost.

Reduce costs and waste associated with assembly defects.

improve product quality.

Overmolding

Overmolding is the process of adding an extra layer of material to an existing piece or component. This process is usually used for manufacturing parts, sub-parts of parts, and prototype development. Typically, the substrate material (the first piece of other material that will be bonded and mechanically interlocked) is placed in an injection molding tool, at which point the mold material is shot into or around the substrate. When the over-mold material solidifies, the two materials are combined as a single part.

If you over-molding a metal part with plastic, you can really use any type of plastic. If you are over molding a plastic part with another plastic, there may be some compatibility issues. Your experienced molder will be able to recommend the best material for your project.

By adding textures, colors, and adding necessary functional components, over-molding can be added to change the surface of a piece or product. Other advantages include:

Enhance design flexibility and multi-material components.

Reduce secondary operations; assembly and labor costs.

Improve the strength and structure of parts.

As mentioned above, these processes are relatively easy to understand. However, it is very difficult to master. It requires a high level of technical expertise and attention to detail. When dealing with high-volume production scenarios, the smallest errors can also bring huge losses. This is why it is important to find a high-capacity molding manufacturer. Once you find one, you need to involve them early in the design phase of your part, because they can design value and quality into any problem area.

2021年7月5日星期一

Two-Shot Molding vs. Overmolding

 Injection molding is a popular manufacturing process, which can quickly produce complex-shaped precise parts without wasting a lot of materials.

Many different processes belong to the category of injection molding, including over-molding and two-shot molding. The two processes are similar, but there are some key differences-here are what engineers and designers need to know:

What is two-shot molding?

Two Shot Injection Molds, also known as dual-molds, double-shot molds, or multi-shot molds, are a subcategory of injection molding that allows engineers to create multi-material or multi-colored parts without adding additional assembly steps.

Through the different layers of materials or colors created by the injection molding machine, the two-shot injection molding process is best understood. The first material is injected into the mold to create the substrate, and other materials or materials will be molded around the substrate. After the substrate solidifies and cools, it is transferred by hand, robotic arm, or rotating plane to another cavity of the mold.

From there, the mold opens and rotates 180° with one side of the substrate to meet the other mold chamber and injection molding nozzle. Once the substrate is in place, the second material is injected and combined with the substrate to form a firm hold. Once the second layer has cooled, the last part will be sprayed out.

Engineers should know that Two Shot Mold can be accelerated or slowed down, depending on how the substrate is transferred to another cavity of the mold. Hand and robot arm transfer takes longer than the rotating plane, but the rotating platen molding is more expensive, usually, there are only high-efficiency options, mass production runs.

In addition, it is very important that the material of the mold is easy to bond, and the mold must be aligned to prevent deformation of the parts.

Advantages and disadvantages of two-shot molding

Two-shot injection molding is efficient and economical manufacturing technology. This process also produces highly durable terminal parts and assemblies.

From a design point of view, two-shot molding provides designers with a lot of flexibility, because this process can create complex geometric shapes and adapt to multiple colors to produce more beautiful parts.

In addition, because one machine manufactures the entire part, no post-processing is required, and engineers can greatly reduce manufacturing time, thereby reducing costs. However, it is worth noting that the initial two-shot injection molding machine may be costly, and the two-shot injection molding machine is more expensive than the standard injection molding machine. Fortunately, these costs are usually offset by labor savings and assembly costs for large-scale production runs.

What is over-molding?

Overmolding, like Two Shot Moulding, is a multi-shot injection molding process that produces a single final product from two or more different thermoplastics. This process is ideal for engineers who want to build components that are powerful, functional, beautiful, and that will not separate over time.

At the beginning of the over-molding process, engineers inject the substrate with a harder over-molding material. Then, the substrate is placed in an over-mold tool or an over-mold cavity within the same mold. The molten-over mold material is then sprayed into, onto, or around the substrate. After the molten material is cooled, the substrate and the over-mold are chemically or mechanically combined. The entire over-molding process only takes 30 seconds.

The product team must remember that all thermoplastics used in the over-molding process must be chemically or thermally compatible with each other. Compatibility with metal substrates is usually not a problem, because they can be used with any plastic over mold, but the product team may encounter compatibility issues when using plastic over molds. If the substrate and mold are not compatible, the final product may be deformed or poorly bound.

However, if two less compatible plastics must be used, the team can design mechanical bonding properties for the part after the fact, although this may result in higher costs.

Advantages and disadvantages of over-molding

Overmolding and two-shot injection molding have many of the same advantages. They are ideal for quickly creating durable, reliable, and vibration-resistant parts with complex geometries, but over-molding is best suited for low-volume production runs.

Compared with two-shot molding, over-mold design is also easier, because engineers can use any standard injection molding machine to carry out this process.

In terms of disadvantages, the tolerances of over-molded parts are often lower than those of two-shot injection molding. It is also important to remember that plastic compatibility requirements may constrain designers.

2021年6月27日星期日

WIT MOLD has lots of experience on mold making for automotive parts

We have lots of experience on mold making for automotive parts, included:

1. Lamps series
2. Console system series
3. Instrument panel series
4. Engine system series
5. Interior parts series
6. Exterior parts series
If you have the automotive parts need to build mold, please contact us without hesitation. WIT MOLD team will support you to making your projects in very success.

2021年6月19日星期六

INSERTED MOLDING TOOL insert injection molding plastic injection tool

 INSERTED MOLDING TOOL     insert injection molding     plastic injection tool     Injection Mold Company China

 

What does the manufacturing process look like for insert molding?

Insert molding is the process of molding thermoplastic material around a preformed component (an insert) to create a finished part that incorporates multiple materials. The inserts are typically metal parts that are used to reinforce the mechanical properties of the plastic part. The inserts are placed into the mold and thermoplastic is injected into the mold to form the part.  As compared to installing inserts into a plastic part in a post-molding process, the use of molded-in inserts eliminates the need for secondary installation of the inserts and thereby reduces costs.

 

Tool features:

1. Over-moulding metal

2. Hasco 4200 for seal

Part function: Inserted Molding Tools for BMW automotive products.

Part material: TPU+ metal

Cavity: 2+2 cavties

 


Insert Injection Molding Benefits

Metal inserts and bushings are commonly used for reinforcing the mechanical properties of the plastic parts or thermoplastic elastomer products that are created through the insert injection molding process. Insert molding provides a number of benefits that will improve your company’s processes all the way down to its bottom line. Some of the benefits of insert injection molding, include:

Improves component reliability

Improved strength & structure

Reduces assembly and labor costs

Reduces the size & weight of the part

Enhanced design flexibility

 

Applications for Insert Injection Molding

Insert molding is used in a broad range of industries for a variety of uses and applications. WIT MOLD primarily focuses on insert injection molding for the following sectors:  Medical, Pharmaceutical, Dental, Defense, Safety, Industrial, and Electronics/Electrical.

 

WIT Mold supply all kinds of molds, such as conventional plastic molds, precision injection molding, unscrewing molds, two shot injection molds etc., and are mainly exported to North America, Europe and other parts of the world.

 

https://witmold.com/product-item/inserted-molding-tool/

2021年6月11日星期五

THERMOSET INJECTION MOLDS Thermoset Injection Molds for Industrial Switch

 THERMOSET INJECTION MOLDS   Thermoset Injection Molds for Industrial Switch    Thermoset Transfer Molding

 

Thermoset Plastic Pros

The strong molecular bonds provide additional strength to the material, and in some instances, the inability for the plastic to re-melt can be a benefit. In general, thermoset plastics have:

Chemical Resistance: Due to their chemical bonding during the process, thermoset plastics are less susceptible to damage from chemicals and corrosion.

Thermal Resistance: Because these plastics cannot be re-melted, they have higher temperature resistance.

Higher Rigidity: They have an overall higher mechanical strength and dimensional stability due to the cross-linked molecules.

 


Thermoset Plastic Cons

While thermoset plastics have their strengths, they can also be weaknesses. This comes from not only their strengths but also their place in the industry in general.

Availability: Before injection, thermoset plastics are liquids. Between handing, the need for modifications or special injection molds, and the general decline of use, they may be more difficult to find suppliers that carry them.

Un-Recyclable: As mentioned above, thermoset plastics cannot be re-melted, and therefore cannot be recycled into new plastics.

Lower Impact Resistance: While thermoset plastics have higher strength, they have a lower resistance when it comes to impacts. While harder, it tends to shatter instead of flex.

 

Part function: Thermoset Injection Molds for industrial product

Part material: Thermoset materials

Phenolic Resin:Phenolic Molding Compound

 

Why Use Thermoset Molding?

Thermoset materials are generally stronger than thermoplastic materials due to the catalysts that are added to the base compound that cause chemical reactions at the molecular level, forming a harder, irreversible final form. Thermoset plastics cannot be re-melted, only ground and recycled as filler for different applications.

 

Thermoset molded products have electrical and thermal insulation properties, which make them ideal for electrical and electronic applications. They are resistant to corrosion and have high impact strength, depending on the resin, and are cost competitive with engineered thermoplastics. Using thermoset molding allows producers to maintain tighter tolerances during the molding process compared to similar thermoplastic materials.

 

WIT Mold is a professional mold manufacturer in China, with 10+ years rich experience in mold making, specializing in making different types of injection molds widely used in automobiles, household electrical appliances, telephone housing molds etc.


https://witmold.com/product-item/thermoset-injection-molds-2/

2021年6月3日星期四

COLLAPSE CORE MOLDS China Collapse Core Molds

 COLLAPSE CORE MOLDS    China Collapse Core Molds   Collapse Core Molds     Conventional Custom Plastic Molds

 

Collapsible core injection molding applies on plastic injection molding and extrusion, that is good for the parts what inner cavity dimension is bigger than outer dimension, it could demould quickly and successfully when injection and extrusion, such as pipe/fittings with collapsible, instrument shell, sealed gate. etc.

 

Collapsible core technology characteristic:

 


Ingenious structure, moving and demoulding in limited space

High precision and consistency for components

Cool machining technology for material with high hardness

Security & reliable mechanical structure for multi-cavities injection mold, and make the tooling size smaller.

The collapsible core having a straight pin improved stability of the collapsible core segments improving the dimensional accuracy of the molded part. The pin diameter matches the inside diameter of the segments and by being contained by a stripper or containment ring matched to the outside of the segments the pin and the segmented sleeves are self-centering and extremely accurate.

 

Shorter and spring-loaded segments reduce the possibility of injection pressure opening the segments. This reduces the time for injection and reduces cycle time. The increased contact area between the pin and the collapsible core segments improves mold cooling allowing for faster cycle times. The change of shape of the contact area between the segments and the pin, rounded surfaces moving across flat surfaces, reduces wear allowing for less maintenance.

 

WIT Mold supply all kinds of molds, such as conventional plastic molds, precision injection molding, unscrewing molds, two shot injection molds etc., and are mainly exported to North America, Europe and other parts of the world.

 

Our website:witmold.com

 

https://witmold.com/product-item/collapse-core/

Inserted Molding Tools: Precision Solutions for High-Performance Plastic Components

  Inserted molding tools play a critical role in modern plastic manufacturing, enabling the integration of metal or other rigid inserts dir...